Also known as alternative fuels, biofuels are a type of fuel whose energy is derived from biological carbon fixation (i.e. photosynthesis). The biofuel industry has gained popularity due to oil price fluctuations, alternative energy searches and the avoidance of emissions from fossil fuels. Examples of biofuels include biodiesel, green diesel, vegetable oil, bio ethers, biogas, syngas and solid biofuels (sawdust, dried manure, agricultural waste). With a seal-less design, a T-Mag Mag Drive Pump can help pump during the distillation, neutralization or transesterification stages of the biofuel process. We commonly pump or transfer Methanol or Ethanol in Biofuels processing.
The modern chemical industry is essential to the world economy. Chemical processing consists of converting raw materials such as oil, natural gas, air, water, metals and minerals, into more than 70,000 products. These products include a vast array of consumer and industrial goods. Chemicals also play a large part in the manufacturing industry, including the manufacturing of textiles, apparel, petroleum-refining, pulp and paper, primary metals and semiconductor. The T-Mag Mag Drive Pump can assist pumping a large array of chemicals during the transfer, loading or bulk storage stage of many processes. Some of the commonly seen chemicals we pump in Chemical process’s include: Sodium Hydroxide, Sulfuric Acid, Sodium Hypochlorite, Phosphoric Acid, and Potassium Hydroxide.
The food and beverage industry is an industry that is here to stay, from the processing of raw meats to the production of wines and spirits. The food industry in the United States is over a $500 billion industry, which consists of processing foods from raw materials to finished products that are made for consumption by both humans and animals. The food and beverage industry depends highly on sanitation and quality both in the finished products and equipment that goes into the production of finished products. That being said, T-Mag Magnetic Drive Pump can help pump an array of chemicals including cleaning chemicals, detergents and sanitizers. Some of the commonly seen chemicals we pump in sanitary plants include: Phosphoric Acid, Citric Acid, Sodium Hydroxide, Sodium Hypochlorite, and Nitric Acid.
General Industry covers all sorts of companies, from metal finishing and pickling to filtration and battery manufacturing. There are liquids being pumped in all industries, whether it is for bulk storage or continuous process. T-Mag pumps can help solve many pumping issues with the use of a seal less containment. From chlorinated swimming pool water to soaps, a T-Mag Magnetic Drive Pump can help make your process reliable. Some of the commonly seen chemicals being pumped are Sodium Hydroxide, Sulfuric Acid, Sodium Hypochlorite, Phosphoric Acid, and Potassium Hydroxide.
The pharmaceutical industry consists of developing, producing and marketing drugs for use as medications in both humans and animals. The pharmaceutical industry has been around since the Middle Ages and as the global economy advances, processes are becoming more automated, while laws and regulations are becoming even more stringent, making it a very competitive industry. Some of the commonly seen chemicals we pump in sanitary plants include: Phosphoric Acid, Citric Acid, Sodium Hydroxide, Sodium Hypochlorite, and Nitric Acid.
The Pulp and Paper industry consists of more than just white printer paper and notebook paper. The industry has expanded over the years to become one of most diverse industries out there. Also included in the Pulp and Paper industry is the manufacturing of specialty coated papers, tissues, container board and paper boards, box and cartons, bags and envelopes. Pulp and Paper mills are located around the globe to service the large need for paper products for everyday use. A T-Mag Magnetic Drive Pump can be used to pump an array of chemicals including Sodium Hypochlorite, Sulfuric Acid, Sodium Hypochlorite, Muriatic Acid, Biocides and Sodium Hydroxide.
The Pulp and Paper industry consists of more than just white printer paper and notebook paper. The industry has expanded over the years to become one of most diverse industries out there. Also included in the Pulp and Paper industry is the manufacturing of specialty coated papers, tissues, container board and paper boards, box and cartons, bags and envelopes. Pulp and Paper mills are located around the globe to service the large need for paper products for everyday use. A T-Mag Magnetic Drive Pump can be used to pump an array of chemicals including Sodium Hypochlorite and Sodium Hydroxide.
After water has been treated and used for its initial purpose, it then gets sent down to the drain and onto the next journey. However, the water cannot be sent directly back to the environment because it has been contaminated. Either waste treatment facilities or industrial plants have to treat the water so it can either be re-used or disposed of. There are many different processes that wastewater treatment facilities can use depending on the type of water it is. Often treatment facilities use chemicals to treat the water; this is where a T-Mag Mag Drive Pump can be used to pump sodium hypochlorite, potassium hydroxide and ferric Chlorides during the wastewater treatment process.
As water is one of the most critical aspects to human survival, the treatment of water in order to make it drinkable and clean enough for the use in manufacturing, is just as important. Common markets in the water treatment world include the production of potable-water systems to purify water for human use, and water treatment facilities that process the water to be used in HVAC systems, boilers and cooling towers. Many chemicals are used in the treatment of water, which leads to many uses for a T-Mag Mag Drive Pump, including Bleach, Sodium Hypochlorite and Muriatic Acid.
We just shipped out some additional AMX Series pumps to an Aluminum Anodizing operation. These pumps are being used on the anodizing line for recirculating various bath / dip tanks full of various chemicals. Depending on the arrangement, the pumps could be piped in directly to the tank feeding various spray nozzles or jets, or […]
Do you want to standardize on your pump sizes, but have different level tanks or uneven ground? We can built you a pump base that utilizes adjusting feet for either pump inlet height or leveling adjustments. Here we built multiple pump bases with T-Mag AMX series centrifugal pumps and adjustable feet on them.
Our AM Series Mag Drive Pump, AMX Series Mag Drive Pump and pump accessories are all now available for purchase online from the Anderson Process store. With over 30,000 square feet of warehouse and manufacturing space, T-Mag is ready to serve the US for all of their magnetic drive pump and accessory needs. Anderson Process and T-Mag […]
If your pump is down or you have a short delivery timeframe: we have completed inventory on hand. Whether you are in need of a complete pump with a motor, replacement wet end or individual parts, we have it in stock!
We shipped out 15 T-Mag AMX Series pumps to a customer for pumping Sulfuric acid in the battery manufacturing industry. These pumps were used to pump from the bulk storage tanks to the production line when the demand of Sulfuric acid was needed. These pumps run 24/7 when in production.
Here is a successful application installed by a distributor in the oilfield. These T-Mag AMX Series pumps were used for the transfer and mix together combinations of different Hydrochloric Acid concentrations. The pumps were then used to transfer the acid for use. These pumps run were operating anywhere form 100 GPM to 175 GPM depending on demand.
We worked with a customer to develop a heating skid to keep their product (Mixture of RO Water and Dimethylformamide) temperatures in bulk storage tanks at the proper temperature. When they needed to transfer the product to the production line for use, it was already at the necessary temperature, filtered to specification and ready for […]
We designed this skid with our T-Mag magnetic drive centrifugal sealless pump, WEG explosion proof motor, Pentair filters and housings and Dixon cam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was […]
Here is an exploded view of the AMX Series pump, showing the simplicity of the mag-drive centrifugal pump. It shows the patented buffer system and the rotating flanges to match up bolt holes after installation.