News & Knowledge

We just shipped out some additional AMX Series pumps to an Aluminum Anodizing operation.  These pumps are being used on the anodizing line for recirculating various bath / dip tanks full of various chemicals.  Depending on the arrangement, the pumps could be piped in directly to the tank feeding various spray nozzles or jets, or […]

Our AM Series Mag Drive Pump, AMX Series Mag Drive Pump and pump accessories are all now available for purchase online from the Anderson Process store. With over 30,000 square feet of warehouse and manufacturing space, T-Mag is ready to serve the US for all of their magnetic drive pump and accessory needs. Anderson Process and T-Mag […]

We shipped out 15 T-Mag AMX Series pumps to a customer for pumping Sulfuric acid in the battery manufacturing industry. These pumps were used to pump from the bulk storage tanks to the production line when the demand of Sulfuric acid was needed. These pumps run 24/7 when in production.

Here is a successful application installed by a distributor in the oilfield. These T-Mag AMX Series pumps were used for the transfer and mix together combinations of different Hydrochloric Acid concentrations. The pumps were then used to transfer the acid for use. These pumps run were operating anywhere form 100 GPM to 175 GPM depending on demand.

We worked with a customer to develop a heating skid to keep their product (Mixture of RO Water and Dimethylformamide) temperatures in bulk storage tanks at the proper temperature. When they needed to transfer the product to the production line for use, it was already at the necessary temperature, filtered to specification and ready for […]

We designed this skid with our T-Mag magnetic drive centrifugal sealless pump, WEG explosion proof motor, Pentair filters and housings and Dixon cam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was […]

Here is an exploded view of the AMX Series pump, showing the simplicity of the mag-drive centrifugal pump.  It shows the patented buffer system and the rotating flanges to match up bolt holes after installation.

Distributor replaces competing mag drive pump supplied on an OEM system. The Pump replaced was a magnetic drive pump, the customer was having consistent problems with the competitor’s pumps when used in upset conditions as well as getting replacement pumps. I worked with them closely and helped modify their piping to fit in the T-Mag […]